CAMSIZER® X2

 Dynamic Image Analysis (DIA)

The CAMSIZER X2 uses the principle of digital image processing. The patented principle is fairly simple: Dispersed particles pass in front of two bright, pulsed LED light sources. The shadows of the particles are captured with two digital cameras.

One camera is optimized to analyse the small particles with high resolution, the other camera for the detection of the big particles with a good statistic, that means large field of view. Each camera is illuminated by one LED with optimized brightness, pulse length and field of view. A user-friendly software analyzes the size and shape of each particle, and finally calculates the respective distribution curves in realtime.

LIST
CAMSIZER X2
Measuring principle
Dynamic Image Analysis (ISO 13322-2)
Measuring range
Standard
0.8 µm to 8 mm
10 µm to 8 mm (gravity dispersion)
0.8 µm to 5 mm (air pressure dispersion)
0.8 µm to 1 mm (wet dispersion)
extended measuring ranges
more information
Type of analysis
dry and wet analysis
Measuring time
~ 1 to 3 min (depending on the desired measuring statistics)
Number of cameras
2
Sample volume
< 20 mg - 500 g (depends on sample type and measurement mode)
Measuring methods
> 300 images/s, each with approx. 4.2 MPixel
Width of analysis area
~ 20 x 20 mm
Resolution
0.8 µm per pixel
Measurement parameters
particle size (smallest diameter, length, mean diameter, etc.)
particle shape (aspect ration width to length, symmetry,
sphericity, convexity etc., acc. to ISO 9276-6)
Dimensions (W x H x D)
~ 850 x 580 x 570 mm